|
The biggest problem encountered when rabbeting is achieving a
cut with a deep enough groove. Usually it takes more than one
cut to get the depth you want causing you to risk precision and
waste time. With CMT Rabbeting Bits, the problem is resolved.
Our carbide faced rabbeting bits are fast and accurate - you can
quickly produce inset doors and drawer fronts, make strong
rabbet joints, mill perfect tongue and groove joints or any
number of other jobs that before were time consuming and
difficult. You can even re-groove old window frames to fit
insulated glass panes with the extra long CMT 3/4" rabbeting
bit. Other possibilities are illustrated below and on the
following pages. Use our Slot Cutters and Round Over Bits to put
extra finishing touches on all your grooving and rabbeting
projects. See pages 37 and 38 for Rabbeting Sets. |
 |
|
|
|
|
|
|
Item No. |
Shank |
Bearing
Dia. |
Cutting
Dia. (in.) |
Cutting
Depth |
Cutting
Length |
|
835.317.11 |
1/4 |
1/2 |
1-1/4” |
3/8 |
1/2” |
|
835.350.11 |
1/4 |
3/8 |
1-3/8” |
1/2 |
1/2” |
|
835.817.11 |
1/2 |
1/2 |
1-1/4” |
3/8 |
1/2” |
|
835.850.11 |
1/2 |
3/8 |
1-3/8” |
1/2 |
1/2” |
|
835.851.11 |
1/2 |
3/8 |
1-3/8” |
1/2 |
3/4” |
|
Spare Parts: |
|
791.002.00 |
Bearing 3/8 |
|
791.003.00 |
Bearing 1/2 |
|
990.057.00 |
Screw for Bearing 1/8W X 1/4" |
|
991.057.00 |
Hex Key 3/32 |
|
|
|
